Ultrasonic Cleaning Fluids - Solutions For Ultrasonic Cleaners
Kemet offer the finest in biodegradable cleaning fluids. These are specialist formulated concentrated detergents available in neutral, alkaline and acid types. The detergents work in two ways: It reduces surface tension and intensifies ultrasonic cavitation & Dissolves and binds the dirt which has been loosened by the ultrasonics.
Disclaimer: Kemet recommend that any cleaning fluid should be tested on a sample of the component to be cleaned to ensure it does not damage the material and offer free trials to establish the optimum process.
With more than 400 high performance formulations providing a solution to most cleaning challenges.
- Free consultations and trials to adapt formulations to specific requirements and optimise cleaning processes.
- Environmentally aware process development to offer ecological solutions.
- Physiochemical and physical wastewater treatment systems to comply with environmental legislation.
- Compatible with Kemet range of ultrasonic cleaners.
For advice on which cleaning solution to use contact our cleaning experts.
|Type||Package Size||Product Code||Alkaline or Acid||PH approx||Dilution % Suggested||Temp °C Suggested||Suggested Use||Comments|
|Decoclean 440||25 Litre||362945||Alkaline||13||5 - 15%||50 - 80°C||Heavy contamination on Ferrous metals only. Ultrasonic or Spray||Do not use on Non-ferrous metals. Rinse well.|
|Decomet||10 Litre||363154||Slightly acidic||2.4||4 - 20%||20 - 70°C||For finishing and decontamination after cleaning||Ideally suited to the medical Industry|
|Galvex SU 737||5 Litre||362988||Alkaline||8||3 - 5%||50 - 75°C||Universal, neutral for all metals, Watch parts, etc.||Removes polishing compounds, good in hard /soft water|
|Galvex SU 747||5 Litre||362938||Alkaline||10||1 - 3%||50 - 80°C||Slightly stronger version of 737. IE: Watch cases, straps etc. S.Steel & Gold||Removes polishing compounds, good in hard /soft water|
|Galvex 17:30||25 Litre||362940||Alkaline||10||1 - 2%||50 - 80°C||General purpose on all Metals. Cleaning prior to plating /coating||Removes oil & polishing componds and general contamination|
|Galvex 17:30N||25 Litre||362942||Alkaline||10||3 - 5%||50 - 80°C||Suitable for most metals but test first. Adds corrosion protection to steels||Removes oil & polishing componds and general contamination|
|Galvex 18:01||25 Litre||362944||Alkaline||9.5||3 - 5%||50 - 75°C||General purpose on all Metals. Also on Plastic machine cases||Removes polishing componds and general contamination. Free Rinsing.|
|Galvex 18.07||10 Litre||363143||Alkaline||9.2||0.2 - 3%||40 - 70°C||Primarily for light oil removal on sensitive metals. Phosphate free and contains built in inhibitors for short term protection||Also provides anti-static effect. Excellent finishing properties.|
|Galvex 20.01||10 Litre||363145||Slightly Alkaline||8.7||1 - 5%||50 - 70°C||For the effective removal of polishing compounds and light oil||Ideally suited to the medical industry|
|Helit Plus||5 Litre||362963||Alkaline||7.8||3 - 5%||40 - 70°C||Universal, neutral for Jewellery, Watch parts, Luxury items.||Non tarnishing will brighten, removes oils buffing compounds.|
|Korrostop 5000||5 Litre||363150||Alkaline||11.1||0.02 - 1%||20 - 30°C||Anti-corrosion protection for steel||Consult our technical department for specific advice|
|Korrostop 6500||5 Litre||363152||N/A||N/A||3 - 10%||20 - 60°C||Anti-corrosion protection for ferrous and copper alloys||Consult our technical department for specific advice|
|Nanoclean Super||10 Litre||363148||Alkaline||12.6||3 - 20%||40 - 60°C||Mould cleaning, carbon removal, Steels, Ceramics / Glass||Powerful detergent. Will etch or attack non-ferrous materials. Steel may discolour at high temperature|
|Rodacleen Supra||25 Litre||363010||Alkaline||12.5||3 - 5%||60 - 70°C||Surface preparation on: Ceramics, titanium, steel HSS & hard metal prior to P.V.D.||Removes grinding & lapping paste. Might need Rodastel 30 to neutralise and assist rinsing.|
|Rodaweg||25 Litre||363007||Alkaline||12.7||2 - 4%||30 - 75°C||Metal surfaces prior to Vacuum Coating. Can be used at 30° C||Removes oil & polishing componds from steel & hard surfaces|
|Rodastel 30||25 Litre||362947||Acidic||2||3 - 5%||Ambient to 60°C||Deoxidation, neutralise prior to Vacuum Metallisation.||Low acidic not classed as hazardous. Will shine copper alloys|
|Solvit 3||25 Litre||362946||Acidic||2||3 - 10% Ultrasonic 10-30% Dip||Ambient to 45°C||Oxide, oils, carbon and polishing compounds from all metals.||Strong acidic action. Rinse well or, neutralise after use.|
|Type||Package Size||Product Code||Alkaline or Acid||PH approx||Dilution % Suggested||Temp °C Suggested||Inhibitor||Suggested Use||Comments|
|A9||5 Kg||360477||Light Alkaline||9.5||3-15%, Suggest 10%||40-60°C||Yes, short duration @ 1-3%||Nearly neutral to suit all materials||Temperature above 40°C can change the colour of non-ferrous materials|
|A||1 Litre||362194||Alkaline||13||15%||40-65°C||General Purpose and all Steels||Can lightly etch non-ferrous|
|O2||5 Kg||360920||Alkaline||13||5-25%, Suggest 10%||40-75°C||General purpose and all Steels (suitable for spray wash 1-5% dilution)||Low foam detergent. Most lightly etch some non-ferrous materials|
|H14||5 Kg||360474||Strong Alkaline||14||3-30%, Suggest 15%||60-85°C85°C optimum||Mould cleaning, carbon removal, Steels, Ceramics / Glass||Powerful detergent. Will etch or attack non-ferrous materials. Steel may discolour at high temperature|
|N||1 Litre||360404||Neutral||7||15%||40-60°C||Neutral to suit all materials including plastics||Temperatures above 40°C can change the colour of materials, water marks possible|
|S8||5 Litre||362499||Very Light Alkaline||8||3-5%||50-75°C||Yes, short duration @ 1-3%||Virtually neutral to suit all metals||Highly concentrated. Good for removing wax based compounds at approx 70°C (Same as Galvex SU737)|
|ACA||1 Kg||361470||Very Light Alkaline||10||0.5-3%||Ambient to 40°C||Yes, Main Purpose||Inhibitor in rinse to prevent corrosion||Stops corrosion on ferrous metals|
|S3||5 Litre||361441||Very Mild Acid||2.5||10-15%||40-70°C||Tarnish, light corrosion of most materials. Brightens jewellery and coins||Protect ferrous materials after cleaning. Not suitable for some plated metals|
|I||5 Kg||360480||Acid||1||5-10%, Start at 5%||25-60°CStart 25°C||Rust and oxide removal on all materials. Restore white ceramics||Will etch all materials and brighten some non-ferrous. Cold rinse, dry immediately. Protect ferrous|
|M99||20 Kg||360486||-||-||100%||(Flash Point 97°C) <75°C||Yes||Dewatering. Removes water moisture, provides corrosion protection||Dewatering fluid for moulds / parts going into storage. Immerse / drain over tank|
|C160||25 Litre||E05615||-||-||100%||(Flash Point 158°C) <120°C||Removing waxes, grease, polishes, lap compounds||High temp solvent. Use heated dip tanks. Ultrasonics can be rinsed with aqueous|
Other Cleaning Solutions
CO-42 Cleaning solution
A cleaning and degreasing fluid with many of the performance characteristics of 1.1.1 Trichloroethane, but without the ozone depleting properties.
CO-42 cuts through contamination such as lapping and polishing residue, grease, oils and general surface contamination.
CO-42 is relatively quick drying, but not so fast as to leave dried staining on the surfaces of products. The controlled wetting and evaporation properties of CO-42 make it extremely versatile and efficient.
Able to act as an extremely efficient cleaning agent for all metals, most plastics, ceramics, glass and similar materials.
C70 Cleaning solution
Kemet C70 is a solvent cleaning and degreasing fluid with all of the characteristics needed to remove grease, oil and residues from parts. It is supplied in a pressurised container complete with detachable extended spray tube for reaching into the most difficult areas.
- Highly efficient degreasing solvent
- Very fast evaporation rate
- No staining
- Instantly removes lapping and polishing residue
- Cost effective
- Versatile and can be used on all metals, ceramics etc. (Always test small area first)
- Contains no ozone depleting substances
|500ml||Aerosols (Pk 12)||302115|
Cleaning Test Centre
At our dedicated cleaning test centre in Maidstone, we have the latest demonstration and test facilities to develop cleaning processes tailor made to the customer's requirements. We are able to undertake free of charge cleaning trials using a large variety of ultrasonic cleaners.
For further details on our ultrasonic cleaning trials or mould cleaning trials, please contact our Ultrasonic Cleaning Manager or call +65 64820990