Portable Lapping Kits

Pressure Relief Valve Lapping Kit

Kemet have produced a lapping kit that can be used on Tyco, Crosby, and Anderson Greenwood pressure relief valves.

Incorrect lapping and or the use of improper equipment is a major contributor to seat leakage, which in turn leads to high emission rates and costs in loss of process.

  • 15 Lapping / Polishing blocks, double sided (D through T2 orifice sizes)
  • 1 x Applikator of 3 Micron Kemet Diamond Compound.
  • 1 x Applikator of 14 Micron Kemet Diamond Compound.
  • Bramet Silicon Carbide self adhesive papers. Grades 60, 120, 180, 320 Grit.
  • Housed in strong ABS plastic case (Weight approx 11.5 Kg)

Contents of Pressure Relief Valve Lapping Kit – Product Code 352900

Pressure Relief Valve Lapping Kit

Kemet Portable Hand 3 Lap Kit for Lapping and Polishing

The Portable Hand 3 Lap Kit is admirably suited for ON SITE refurbishment. It contains three lapping plates, each with its own grade of Kemet Diamond Compound. This makes it possible to process components, e.g. valves and seals, in three stages from lapping through to polishing. Each lapping plate is backed with anti-slip matting.

  • Kemet Iron Lap Plate (for lapping), 150mm dia., on an aluminum backing plate with non-skid facings.
  • Kemet XP Lap Plate (for lapping), 150mm dia., on an aluminum backing plate with non-skid facings.
  • Kemet Tin Lap Plate (for polishing), 150mm dia., on an aluminum backing plate with non-skid facings.
  • 1 x 10g Kemet Diamond Compound Application Stick - 25 Micron.
  • 1 x 10g Kemet Diamond Compound Application Stick - 8 Micron.
  • 1 x 10g Kemet Diamond Compound Application Stick - 3 Micron.
  • 1 x Kemet OS Lubricating Fluid.
  • 1 x Polished Wooden Box with Operating Instructions.
kemet hand lappin g kit

Portable Concentric Grooving Lapping Kit

Hand lapping uses the same principles as machine lapping with respect to abrasive grade / plate selection / plate flatness, but with the following exceptions

  • Lapping plate is kept stationary
  • Components are moved by hand in a figure of 8 action
  • Diamond compounds or liquid diamond can be used

Leaking pumps, valves and seals cause many problems, leading to wastage, poor performance, unnecessary costs, even health hazards. Kemet Portable Lapping Kits enable refurbishment to be carried out on site, reducing expensive downtime. Components manufactured from ceramics, tungsten carbide, stellite, brass, steel, silicon carbide, carbon, ni-resist etc, can be lapped and/or polished by hand in minutes rather than hours. The kits are also ideal for low volume production, where it is not economical to purchase a lapping or polishing machine.

Kits available:

TYPE L for lapping

  • Kemet Iron Lap Plate (for lapping) 348mm dia. with concentric grooving, on an aluminum backing plate.
  • 1 x 10g Kemet Diamond Compound Application Stick - 25 Micron.
  • 1 x Kemet OS Lubricating Fluid
  • 1 x Polished Wooden Box with Operating Instructions

TYPE P for polishing

  • Kemet XP Lap Plate (for polishing) 348mm dia. with concentric grooving, on an aluminum backing plate.
  • 1 x 10g Kemet Diamond Compound Application Stick - 3 Micron.
  • 1 x Kemet OS Lubricating Fluid
  • 1 x Polished Wooden Box with Operating Instructions
concentric grooving kit

Carbon Mechanical Seals Lapping Kit

Kemet have developed a portable kit for dry lapping of carbon mechanical seals. The kit consists of a lapped aluminum substrate and 5 superfine abrasive discs. The specially designed discs allow carbon seals to be lapped without the need for any added loose abrasive. This alleviates loose abrasive impregnation into the carbon face.

  • 300mm diameter Kemet lapping plate
  • Kemet portable case for ease of transport
  • Special polishing discs (Pack 5)
  • Consumables to maintain the condition of the lapping plate
  • Code: 352565
carbon seal lapping kit

Kemet awarding bodies

Over 85 years of service to industry

Your subscription could not be saved. Please try again.
:)

Signup to receive our special offers

 

 

Cookies & Privacy Policy
© 2024 Kemet International Ltd